Corrosion & Asset Protection
Extending Asset Lifespan
With over 7 million square meters of coatings applied in Australia and New Zealand, Pacific Urethanes’ unrivalled range of high-performance polyurea and hybrid systems provide flexible, durable, unbroken membranes across an extensive range of water, chemical and abrasive environments, or the harsh conditions of mining.
Our team can develop the best solution for all your requirements.
Long-Term Asset Protection
Why Polyurethanes?
Polyurethane is a highly versatile polymer that combines two chemicals: polyol and isocyanate. Being able to mix the ratios of these chemicals, plus the addition of catalysts, is what makes polyurethane so versatile.
Developed through extensive research and testing procedures, high-performance polyurea and hybrid systems provide flexible, durable, and unbroken membranes in harsh mining conditions across water, chemical and abrasive environments.
Pacific Urethanes’ polyurethane coatings provide high levels of corrosion protection combined with high levels of wear resistance, which protect and extend the life of the asset. This will result in substantial long-term cost savings, reduced service time, and minimal wear and tear.
![Why Polyurethanes Why Polyurethanes](https://www.pacificurethanes.com/wp-content/uploads/2024/05/iStock-96277831-optimised.jpg)
Mining Products
Two-Component Primer is a two-component, high solids, liquid applied, epoxy-polyamine primer with unique penetrating characteristics. Also, ANSI/ NSF 61 and AS:4020 approved providing confidence that all products used are suitable for direct contact with potable water.
Features:Seamless
- Excellent Adhesion
- Low Viscosity
- Low VOC
Typical Uses:
- Concrete
- Plywood
- Carbon steel
Two Component Aromatic Polyurea Protective Coatings is Is a fast, set rapid curing, 100% solids, flexible, aromatic, two component spray polyurea that can be applied to suitably prepared concrete and metal surfaces. Its extremely fast gel time makes it suitable for applications down to -20°F (-29°C). It may be applied in single or multiple applications without appreciable sagging and is relatively insensitive to moisture and temperature allowing application in most temperatures.
Features:
- Zero VOC (100% solids)
- Seamless
- Excellent thermal Stability
- Odourless
- No Toxic Vapours
- Non-Reactive
- Meets USDA Criteria
- Good Chemical Resistance
- Coats Carbon or Mild Steel Metals without Primer
- Installed with or without Reinforcement in Transitional Areas
Typical Uses:
- Airports
- Power Plants
- Refineries
- Structural Steel
- Fertilizer Plants
- Warehouse Floors
- Mining Operations
- Cold Storage Facilities
- Food Processing Plants
- Landfill Containment
- Marine Environments
- Paper and Pulp Mills
- Secondary Containment
- Parking Garage Decks
- Walkways and Balconies
- Water and Wastewater Treatment
- Industrial and Manufacturing Facilities
Has NSF-61 approval for direct contact with potable water and is recommended for use as a coating or lining on suitably primed carbon steel, non-ferrous metal and concrete. Polyurethane spray coatings are typically used as a coating or liner in slurry tanks, water tanks, secondary containment and waste-water management applications.
It offers a tack free time of less than five minutes and exhibits 20-30% elongation upon curing with 65 Shore D hardness.
Features:
- High Build, Quick Dry
- Chemical Resistant
- Low Temperature Flexibility
- 100% Solids
- Abrasion and Impact Resistant
- Horizontal Surface Application
- Plural Component Spray Application
Typical Uses:
- Petrochemical Plants
- Mining
- Pipelining and Repair
- Power Plants
- Pulp and Paper Plants
- Manholes
- Secondary Containment
- Pen Stocks
- Concrete/Steel Water Storage Tanks
- Water and Wastewater Treatment Plants
High Abrasion Resistance Spray Elastomer Coating is a revolutionary high wear resistant specialty polyurea which is a 100% solids, flexible, two component, high-performance-spray elastomer. It offers exceptional performance in tensile strength, high-tear, high-chemical and impact resistance in severely demanding applications against abrasion.
Features:
- Exceptional Abrasion Resistance
- Exceptional Hydrolytic Stability
- High Tear and Impact Resistance
- Excellent Impact Dampening
- Excellent Thermal Stability
- Zero VOC (100% Solids)
- Low Temperature Flexibility
- Good Chemical Resistance
- Coats Carbon or Mild Steel Metals without Primer
Typical Uses:
Protective lining and coating on interior of concrete, masonry and metal structures in various facilities like:
- Dredging
- Petrol Refineries
- Cargo Containers
- Mining Operations
- Landfill Containment
- Marine Environments
- Secondary Containment
- Water and Wastewater Treatment
- Industrial and Manufacturing Facilities
Industrial Products
Two-Component Modified Polyurea Protective Coating is a high pressure, hybrid polyurea system for general purpose use in waterproofing and other industrial and maintenance applications. This system is a two component, 1:1, 100% solids, fast set, liquid applied, modified polyurea liner system for metal, concrete, fiberglass and wood surfaces.
Features:
- Seamless
- High Build
- Tough and Elastomeric
- Quick Drying
- Chemical Resistant
- Low Temperature Flexibility
- Abrasion and Impact Resistant
Typical Uses:
- Truck Bed Surfaces
- Cargo Holds
- Utility Vehicles
- Horse Trailers
- Cargo liners
- Industrial Floorings
- Boat Linings
- Walkways
- Waterproof Decking
- Containment Areas
- Encapsulation of Fiberglass Bodies and Polystyrene Foams
High Abrasion Resistance Spray Elastomer Coatings is a revolutionary high wear resistant specialty polyurea which is a 100% solids, flexible, two component, high-performance-spray elastomer.
It offers exceptional performance in tensile strength, high-tear, high-chemical and impact resistance in severely demanding applications against abrasion.
Features:
- Exceptional Abrasion Resistance
- Exceptional Hydrolytic Stability
- High Tear and Impact Resistance
- Excellent Impact Dampening
- Excellent Thermal Stability
- Zero VOC (100% Solids)
- Low Temperature Flexibility
- Good Chemical Resistance
- Coats Carbon or Mild Steel Metals without Primer
Typical Uses:
Protective lining and coating on interior of concrete, masonry and metal structures in various facilities like:
- Dredging
- Petrol Refineries
- Cargo Containers
- Mining Operations
- Landfill Containment
- Marine Environments
- Secondary Containment
- Water and Wastewater Treatment
- Industrial and Manufacturing Facilities
Food & Agriculture Products
Two-Component Primer is a two-component, high solids, liquid applied, epoxy-polyamine primer with unique penetrating characteristics. Also is ANSI/ NSF 61 and AS:4020 approved providing confidence that all products used are suitable for direct contact with potable water.
Features:
- Seamless
- Excellent Adhesion
- Low Viscosity
- Low VOC
Typical Uses:
- Concrete
- Plywood
- Carbon Steel
Two Component Aromatic Polyurea Protective Coatings is a fast, set rapid curing, 100% solids, flexible, aromatic, two component spray polyurea that can be applied to suitably prepared concrete and metal surfaces. Its extremely fast gel time makes it suitable for applications down to -20°F (-29°C). It may be applied in single or multiple applications without appreciable sagging and is relatively insensitive to moisture and temperature allowing application in most temperatures.
Features:
- Zero VOC (100% solids)
- Seamless
- Excellent thermal Stability
- Odourless
- No Toxic Vapours
- Non-Reactive
- Meets USDA Criteria
- Good Chemical Resistance
- Coats Carbon or Mild Steel Metals without Primer
- Installed with or without Reinforcement in Transitional Areas
Typical Uses:
- Airports
- Power Plants
- Refineries
- Structural Steel
- Fertilizer Plants
- Warehouse Floors
- Mining Operations
- Cold Storage Facilities
- Food Processing Plants
- Landfill Containment
- Marine Environments
- Paper and Pulp Mills
- Secondary Containment
- Parking Garage Decks
- Walkways and Balconies
- Water and Wastewater Treatment
- Industrial and Manufacturing Facilities
Polyurea Polyurethane Copolymer Protective Coatings has NSF-61 approval for direct contact with potable water and is recommended for use as a coating or lining on suitably primed carbon steel, non-ferrous metal and concrete. Polyurethane spray coatings are typically used as a coating or liner in slurry tanks, water tanks, secondary containment and waste-water management applications.
It offers a tack free time of less than five minutes and exhibits 20-30% elongation upon curing with 65 Shore D hardness.
Features:
- High Build, Quick Dry
- Chemical Resistant
- Low Temperature Flexibility
- 100% Solids
- Abrasion and Impact Resistant
- Horizontal Surface Application
- Plural Component Spray Application
Typical Uses:
- Petrochemical Plants
- Mining
- Pipelining and Repair
- Power Plants
- Pulp and Paper Plants
- Manholes
- Secondary Containment
- Pen Stocks
- Concrete/Steel Water Storage Tanks
- Water and Wastewater Treatment Plants
Water & Wastewater Solutions
Two-Component Primer is a two-component, high solids, liquid applied, epoxy-polyamine primer with unique penetrating characteristics. Also is ANSI/ NSF 61 and AS:4020 approved providing confidence that all products used are suitable for direct contact with potable water.
Features:
- Seamless
- Excellent Adhesion
- Low Viscosity
- Low VOC
Typical Uses:
- Concrete
- Plywood
- Carbon Steel
Two Component Aromatic Polyurea Protective Coatings is a fast, set rapid curing, 100% solids, flexible, aromatic, two component spray polyurea that can be applied to suitably prepared concrete and metal surfaces. Its extremely fast gel time makes it suitable for applications down to -20°F (-29°C). It may be applied in single or multiple applications without appreciable sagging and is relatively insensitive to moisture and temperature allowing application in most temperatures.
Features:
- Zero VOC (100% solids)
- Seamless
- Excellent thermal Stability
- Odourless
- No Toxic Vapours
- Non-Reactive
- Meets USDA Criteria
- Good Chemical Resistance
- Coats Carbon or Mild Steel Metals without Primer
- Installed with or without Reinforcement in Transitional Areas
Typical Uses:
- Airports
- Power Plants
- Refineries
- Structural Steel
- Fertilizer Plants
- Warehouse Floors
- Mining Operations
- Cold Storage Facilities
- Food Processing Plants
- Landfill Containment
- Marine Environments
- Paper and Pulp Mills
- Secondary Containment
- Parking Garage Decks
- Walkways and Balconies
- Water and Wastewater Treatment
- Industrial and Manufacturing Facilities
Polyurea Polyurethane Copolymer Protective Coatings has NSF-61 approval for direct contact with potable water and is recommended for use as a coating or lining on suitably primed carbon steel, non-ferrous metal and concrete. Polyurethane spray coatings are typically used as a coating or liner in slurry tanks, water tanks, secondary containment and waste-water management applications.
It offers a tack free time of less than five minutes and exhibits 20-30% elongation upon curing with 65 Shore D hardness.
Features:
- High Build, Quick Dry
- Chemical Resistant
- Low Temperature Flexibility
- 100% Solids
- Abrasion and Impact Resistant
- Horizontal Surface Application
- Plural Component Spray Application
Typical Uses:
- Petrochemical Plants
- Mining
- Pipelining and Repair
- Power Plants
- Pulp and Paper Plants
- Manholes
- Secondary Containment
- Pen Stocks
- Concrete/Steel Water Storage Tanks
- Water and Wastewater Treatment Plants