Rigid Foams

Pacific Urethanes Products - Rigid FoamsThis product list is a typical example of the rigid foams supplied in these applications. If you require any polyurethane systems not listed please contact our specialists to discuss your requirements further.

General Purpose Foams
Fast Cure Foams
Spray Foams
Discontinuous Block Foams

UrePac® Rigid

UrePac® Rigid products can range from low density foams (10-100kg/m3) for insulation applications to high density foams (101-1000kg/m3) for structural components. Typical applications for low density foams are foam in place packaging, insulating fridges, hot water services and Eskies. High density foams are predominantly used for LNG pipe supports, simulated wood mouldings, and tonneau covers for utility vehicles. Rigid Foams are widely accepted by industry for their excellent insulation values and high strength to weight properties.

Zero Ozone Depletion Potential (ODP) Excellent insulation performance1:1 v/v mix ratio

Product Code Cream Time (s) Free Rise Density (kg/m3) TDS SDS(GHS) Description Features
UrePac Rigid 30 20 30 20 Urepac Rigid 30 20 SDS Urepac Rigid 30 20 Polyol UrePac® Rigid 30 20 is a two component, polyurethane rigid foam comprising of a polyether polyol and MDI based isocyanate. The system has been developed with a long cream time and for use as a low density, open cell insulation and void filling.
  • Excellent Flow
  • Low Lateral Pressure During Expansion
  • Excellent Acoustic Properties
UrePac Rigid 35 34 35 34 UrePac Rigid 35 34 SDS Urepac Rigid 35 34 Polyol UrePac® Rigid 35 34 is a two component, polyurethane rigid foam comprising of a polyether polyol and MDI based isocyanate. The system has been developed for general purpose insulation applications. The system is also designed for use with high and low pressure dispensing equipment.
  • Zero Ozone Depletion Potential (ODP)
  • Excellent Insulation Performance
  • 1:1 v/v Mix Ratio
UrePac Rigid 60 30 60 30 Urepac Rigid 60 30 SDS Urepac Rigid 60 30 Polyol UrePac® Rigid 60 30 is a two component, polyurethane rigid foam comprising of a polyether polyol and MDI based isocyanate. The system has been developed with a long cream time for general purpose hand mix applications.
  • Zero Ozone Depletion Potential (ODP) Blowing Agent
  • Slow Reactivity for Maximum Working Time
  • 1:1 v/v Mix Ratio
UrePac Rigid 55 40 55 40 Urepac Rigid 55 40 SDS Urepac Rigid 55 40 Polyol UrePac® Rigid 55 40 is a two component, polyurethane rigid foam comprising of polyether polyol and MDI based isocyanate. The system has been formulated to meet the requirements of the Australian Standard for GP polyurethane block foam.
  • Zero ODP Blowing Agent
  • Excellent Insulation Values
  • High Strength to Weight Ratio
UrePac Rigid 60 60 60 60 Urepac Rigid 60 60 SDS Urepac Rigid 60 60 Polyol UrePac® Rigid 60 60 is a two component, polyurethane rigid foam comprising of a polyether polyol and MDI based isocyanate. The system has been developed with a long cream time for general purpose hand mix applications.
  • Zero Ozone Depletion Potential (ODP) Blowing Agent
  • Slow Reactivity for Maximum Working Time
  • 1:1 v/v Mix Ratio
UrePac Rigid 90 105 90 105 Urepac Rigid 90 105 SDS Urepac Rigid 90 105 Polyol Urepac™ Rigid 90 105 is a two component, polyurethane rigid foam based on polyether polyol and MDI isocyanate. The system has been developed with excellent structural and fast reaction properties for use in machine moulding of structural components
UrePac Rigid 50 280 50 280 UrePac Rigid 50 280 SDS Urepac Rigid 50 280 Polyol UrePac® Rigid 50 280 is a high density, polyurethane rigid foam comprising of a polyether polyol and MDI based isocyanate. It was formulated to be a slow reacting, structural foam for hand mix or machine dispensed general purpose mouldings.
  • Exceptional Strength to Weight Properties
  • Long Reaction Times
  • Excellent Impact Resistance
UrePac Rigid 90 370 90 370 UrePac Rigid 90 370 SDS Urepac Rigid 90 370 Polyol UrePac® Rigid 90 370 is a high density, polyurethane rigid foam comprising of a polyether polyol and MDI based isocyanate. It was formulated to be a slow reacting, structural foam for hand mix or machine dispensed general purpose mouldings.
  • Exceptional Strength to Weight Properties
  • Long Reaction Times
  • Excellent Impact Resistance
Product Code Cream Time (s) Free Rise Density (kg/m3) TDS SDS(GHS) Description Features
UrePac Rigid 18 28 18 28 UrePac Rigid 18 28 SDS Urepac Rigid 18 28 Polyol UrePac® Rigid 18 28 is a two component, polyurethane rigid foam comprising of a polyether polyol and MDI based isocyanate. The system has been developed for fast curing and excellent insulation performance for general purpose machine dispense applications.
  • Exceptional Insulation
  • Fast Demould
  • 1: v/v mix ratio
UrePac Rigid 16 44 16 44 Urepac Rigid 16 44 SDS Urepac Rigid 16 44 Polyol UrePac® Rigid 16 44 is a two component, polyurethane rigid foam comprising of a polyether polyol and MDI based isocyanate. The system has been developed to be processed through high or low pressure dispensing machinery with excellent insulation performance for general purpose applications.
  • Zero ODP and GWP
  • Exceptional Insulation
  • Excellent Flow
Product Code Cream Time (s) Free Rise Density (kg/m3) TDS SDS(GHS) Description Features
UrePac Rigid 3 34 (Fire Retardant) 3 34 UrePac Rigid 3 34 SDS Urepac Rigid 3 34 Polyol UrePac® Rigid 3 34FR (AUSFOAM 30) is a low density rigid polyurethane Spray Foam system specifically formulated to provide a highly flame retarded foam system with a nominal ‘applied’ density of 35 kg/m3 depending on application parameters. It is formulated for use in commercial / industrial wall and ceiling insulation applications where the foam is applied into installed stud work / framed construction. It is to be installed according to the applicable Building Code of Australia regulations and design codes
  • Highly Fire Retardant
  • Excellent Surface Finish
  • 1:1 Mix Ratio for Standard Graco Equipment
UrePac Rigid 3 30 Chlorine Free 3 30 UrePac Rigid 3 30 Chlorine Free Spray Foam SDS Urepac Rigid 3 30 Chlorine Free Polyol UrePac® Rigid 3 30CF is a low density rigid polyurethane Spray Foam system based on polyether polyols and MDI isocyanate. It has been specifically formulated to be halogen free for application to stainless steel. The product has excellent insulation and reactivity for horizontal and vertical application.
  • Zero ODP
  • Seamless, Durable and Waterproof
  • Halogen Free for Stainless Steel
UrePac Rigid 3 50 3 50 Urepac Rigid 3 50 SDS Urepac Rigid 3 50 Polyol    
UrePac Rigid 4 100 4 100 UrePac Rigid 4 100 SDS Urepac Rigid 4 100 Polyol UrePac® Rigid 4 100 is a low density rigid polyurethane Spray Foam system based on polyether polyols and MDI isocyanate. It has been specifically formulated to be a medium density structural spray foam.
  • Zero ODP
  • Seamless, Durable and Waterproof
  • High Strength to Weight Properties
UrePac Rigid 6 9 6 9 Urepac Rigid 6 9 SDS Urepac Rigid 6 9 Polyol UrePac® Rigid 6 9 is an ultra low density ‘open cell’ Spray Foam system specifically formulated to provide a foam with a nominal ‘applied’ core density of 8-10 kg/m3 (1/2 pound) depending on application parameters. It is formulated for use in commercial / residential wall and ceiling insulation applications where the foam is applied into installed stud work / framed construction. It is to be installed according to the applicable Building Code of Australia regulations and design codes.
  • Over 100 Times Expansion
  • Excellent Acoustic and Thermal Insulation Properties
  • 1:1 Mix Ratio for Standard Graco Equipment
Product Code Cream Time (s) Free Rise Density (kg/m3) TDS SDS(GHS) Decription Features
UrePac Rigid 50 15 50 15 UrePac Rigid 50 15 SDS Urepac Rigid 50 15 Polyol UrePac® Rigid 50 15 is a two component, polyurethane rigid foam comprising of a polyether polyol and MDI based isocyanate. The system has been developed as a very low density, open cell, thermoformable block foam for acoustic insulation applications.
  • Fire Retardant (Addition of UrePac +3106 used to meet Automotive Under Bonnet Fire Performance Specifications)
  • Excellent Acoustic Performance
  • Slow Reactivity for Block Foam production
UrePac Rigid 70 70 70 70 Urepac Rigid 70 70 SDS Urepac Rigid 70 70 Polyol UrePac™ Rigid 70 70 is a slow reactivity, two component polyurethane (PUR) rigid foam based on polyether polyol, PMDI isocyanate and zero ozone depletion potential (ODP) blowing agent technology (HFC). The system has been developed so it can be dispensed through low and high pressure equipment or hand-mixed and poured. The foam was designed for use as a medium density PUR block foam with a core density of 60-65 kg/m3 for general purpose thermal insulation applications.
  • High Strength
  • Slow Reactivity
  • Low Viscosity
UrePac Rigid 80 130 80 130 UrePac Rigid 80 130 SDS Urepac Rigid 80 130 Polyol UrePac™ Rigid 80 130 is a slow reactivity, two component polyurethane (PUR) rigid foam based on polyether polyol and MDI isocyanate. The system has been developed so it can be dispensed through low and high pressure equipment or hand-mixed and poured. The foam was designed for use as a high density PUR block foam with a core density of 120 kg/m3 for general purpose structural applications.
  • High Strength
  • Slow Reactivity
  • 1:1 v/v Mix Ratio
UrePac Rigid 90 160 90 160 Urepac Rigid 90 160 SDS Urepac Rigid 90 160 Polyol UrePac™ Rigid 90 160 is a slow reactivity, two component polyurethane (PUR) rigid foam based on polyether polyol and MDI isocyanate. The system has been developed so it can be dispensed through low and high pressure equipment or hand-mixed and poured. The foam was designed for use as a high density PUR moulded block foam with a core density of 160 kg/m3 for general purpose structural and applications
  • High Strength
  • Slow Reactivity
  • 1:1 w/w Mix Ratio
UrePac Rigid 90 370 90 370 UrePac Rigid 90 370 MSDS Urepac Rigid 90 370 Polyol UrePac® Rigid 90 370 is a high density, polyurethane rigid foam comprising of a polyether polyol and MDI based isocyanate. It was formulated to be a slow reacting, structural foam for hand mix or machine dispensed general purpose mouldings.
  • Exceptional Strength to Weight Rroperties
  • Long Reaction Times
  • Excellent Impact Resistance

Products

Capability Proposition

  • Advanced Technology Pacific Urethanes has a global network of suppliers at the forefront of polyurethane technology…

  • Customised Development – At Pacific Urethanes we take the time to listen and understand our customers’ challenges…

  • Application Experience Pacific Urethanes has an experienced team of professionals in polyurethane application know-how…

Pacific Urethanes - Advanced Technology

Advanced Technology

Pacific Urethanes has a global network of suppliers at the forefront of polyurethane technology…

Pacific Urethanes - Customised Development

Customised Development

We take the time to listen and understand our customers’ challenges, to develop solutions that work, and…

Pacific Urethanes - Application Experience

Application Experience

Pacific Urethanes has an experienced team of professionals in polyurethane application know-how for production and on-site processing environments…